[2stroke]

Where can I find information about doing some changes with VCDS on the Arona ?

VCDS ---> http://www.ross-tech.com/vag-com/

 

[BikeBert]

I have a list of OBDeleven adaptations tried and tested on my girlfriend's 2018 Seat Ibiza Excellence 1.0 TSI 115KM DSG.
Should work on Arona as well.

Remarks:
1. It is highly recommend to make backup before changing anything in control unit. Backup will read all adaptation channels and coding and store it into backup file. Backup file can be accessed in history screen.
2. After use, disconnect [in the App] and/or remove [from the car] the device due to the risk of draining the battery.
3. You perform any of these changes at your own risk. If you aren't sure, don't do it!

You can find more info about the device and application here.

Disable Start/Stop
1. Select Control unit 19 (Gateway)
2. Security access > Access Code: 20103
3. Adaptation
4. Name: Start/stop start voltage limit
5. Change value from 7.6 V to 12 V

__________

Park Pilot (Optical Parking System)
1. Select Control Unit 76 (Parking Assistance)
2. Security access > Access Code: 71679
3. Long Coding
4. Name: Visual display for park assist
5. Change value to "OPS display" [standard: "not installed"]

__________

Pointer test - Needle sweep
1. Select Control unit 17 (Dash Board)
2. Long coding
3. Name: Staging
4. Change value to "Yes" [standard: "No"]

__________

Fan speed on Auto mode
1. Select Control unit 08 (Air Condition)
2. Long Coding
3. Name: Blower display in auto operation
4. Change value to "activated" [standards: "Not activated"]

__________

Seat belt warning deactivation
1. Select Control unit 17 (Dash Board)
2. Security access > Access Code: 25327
3. Long Coding
4. Name: Seat belt warning
5. Change value to "Off" [standard: "On"]

__________

Comfort blink cycle
With this mod, you can change number of flashes of the turn signal
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Außenlicht_Blinker
5. Access Control: Komfortblinken Blinkzyklen
6. Change the desired value: max. 5 [standard - 3]
7. [Reset "Lights" to factory settings on the radio]

__________

Folding Mirrors (while locking the car)
With this mod, mirrors will fold without having to be continually pressing the button on the remote
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Spiegelverstellung
5. Access Control: Funk_Spiegelanklappung_Modus
6. Change value to "by_look_command_via_remote_control_key" [standard: "by_convenience_operation_via_remote_control_key"]

__________

DLR lights off with hand brake
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Außenlicht_Front
5. Access Control: Tagfahrlicht_Dauerfahrlicht_bei_Handbremse_abschalten
6. Change value to "active" [standard: not active]

 

[SteedyCatArona]

Is it also possible to activate the alarm chirp (audible beeps) when locking and unlocking the Arona?

 

[JosephKaLeL]

Please any one could help me with an coding error with ambient lighting the error will be explained and I'll edit this comment and updated with link when YouTube finish upload the video

 

[Lampie]

VCDS mods on my Arona and some future mods

Comfort indicators set to 5 times... is too much, I'm going to bring it back to 4 times
Replaced the foglamps by canbus-LED... still error , going to exclude the foglamps from the canbus control system
Cornering lights turned ON, I have LED headlights ,so this was disabled by Seat
Needle sweep... I like the idea

 

[martinto8]

Needle sweep is only for non-digital dash displays?