How to use VCDS on Arona's... ??

All Seat Arona related discussions
Post Reply
2stroke
Posts: 1
Joined: Wed Jul 04, 2018 9:27 pm
Location: SWEDEN

How to use VCDS on Arona's... ??

Post by 2stroke » Wed Jul 04, 2018 9:35 pm

Where can I find information about doing some changes with VCDS on the Arona ?

VCDS ---> http://www.ross-tech.com/vag-com/
Last edited by 2stroke on Thu Jul 05, 2018 2:20 pm, edited 1 time in total.

User avatar
BikeBert
Posts: 9
Joined: Thu Jul 05, 2018 10:35 am

2018 Seat Ibiza Adaptations - tried and tested

Post by BikeBert » Thu Jul 05, 2018 10:49 am

I have a list of OBDeleven adaptations tried and tested on my girlfriend's 2018 Seat Ibiza Excellence 1.0 TSI 115KM DSG.
Should work on Arona as well.

Remarks:
1. It is highly recommend to make backup before changing anything in control unit. Backup will read all adaptation channels and coding and store it into backup file. Backup file can be accessed in history screen.
2. After use, disconnect [in the App] and/or remove [from the car] the device due to the risk of draining the battery.
3. You perform any of these changes at your own risk. If you aren't sure, don't do it!

You can find more info about the device and application here.



Disable Start/Stop
1. Select Control unit 19 (Gateway)
2. Security access > Access Code: 20103
3. Adaptation
4. Name: Start/stop start voltage limit
5. Change value from 7.6 V to 12 V

__________


Park Pilot (Optical Parking System)
1. Select Control Unit 76 (Parking Assistance)
2. Security access > Access Code: 71679
3. Long Coding
4. Name: Visual display for park assist
5. Change value to "OPS display" [standard: "not installed"]

__________


Pointer test - Needle sweep
1. Select Control unit 17 (Dash Board)
2. Long coding
3. Name: Staging
4. Change value to "Yes" [standard: "No"]

__________


Fan speed on Auto mode
1. Select Control unit 08 (Air Condition)
2. Long Coding
3. Name: Blower display in auto operation
4. Change value to "activated" [standards: "Not activated"]

__________


Seat belt warning deactivation
1. Select Control unit 17 (Dash Board)
2. Security access > Access Code: 25327
3. Long Coding
4. Name: Seat belt warning
5. Change value to "Off" [standard: "On"]

__________


Comfort blink cycle
With this mod, you can change number of flashes of the turn signal
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Außenlicht_Blinker
5. Access Control: Komfortblinken Blinkzyklen
6. Change the desired value: max. 5 [standard – 3]
7. [Reset “Lights” to factory settings on the radio]

__________


Folding Mirrors (while locking the car)
With this mod, mirrors will fold without having to be continually pressing the button on the remote
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Spiegelverstellung
5. Access Control: Funk_Spiegelanklappung_Modus
6. Change value to "by_look_command_via_remote_control_key" [standard: "by_convenience_operation_via_remote_control_key"]

__________


DLR lights off with hand brake
1. Select Control unit 09 (Central Electrics)
2. Security access > Access Code: 31347
3. Adaptation
4. Name: Außenlicht_Front
5. Access Control: Tagfahrlicht_Dauerfahrlicht_bei_Handbremse_abschalten
6. Change value to "active" [standard: not active]

SteedyCatArona
Posts: 10
Joined: Tue Oct 03, 2017 9:27 am

Re: How to use VCDS on Arona's... ??

Post by SteedyCatArona » Mon Jul 16, 2018 2:47 pm

Is it also possible to activate the alarm chirp (audible beeps) when locking and unlocking the Arona?

JosephKaLeL
Posts: 3
Joined: Wed Jan 08, 2020 3:33 am

Re: How to use VCDS on Arona's... ??

Post by JosephKaLeL » Wed Jan 15, 2020 9:23 am

Please any one could help me with an coding error with ambient lighting the error will be explained and I’ll edit this comment and updated with link when YouTube finish upload the video

User avatar
Lampie
Posts: 143
Joined: Fri Apr 26, 2019 7:56 pm
Location: Netherlands

Re: How to use VCDS on Arona's... ??

Post by Lampie » Wed Jan 15, 2020 10:14 pm

VCDS mods on my Arona and some future mods

Comfort indicators set to 5 times... is too much, I'm going to bring it back to 4 times
Replaced the foglamps by canbus-LED... still error , going to exclude the foglamps from the canbus control system
Cornering lights turned ON, I have LED headlights ,so this was disabled by Seat
Needle sweep... I like the idea
Seat Arona FR DSG7 Business Intense Full LED 130HP 280Nm 21340km

Image

Seat Urban Vehicle ®

martinto8
Posts: 22
Joined: Fri Sep 13, 2019 7:09 pm

Re: How to use VCDS on Arona's... ??

Post by martinto8 » Wed Jan 15, 2020 10:33 pm

Needle sweep is only for non-digital dash displays?

Post Reply